Best Audio Interface for REAPER (Windows & Mac) – 2026 Guide

Tested picks that work cleanly with REAPER on Windows and Mac, matched to your budget and setup.

Quick, practical picks for finding the best audio interface for REAPER users. On Windows, stability mostly comes down to good ASIO drivers; on Mac it’s Core Audio.

Jump to top picks Read the Audio Interface Blog
Affiliate disclosure: Some links on this page may be affiliate links. If you purchase through them, I may earn a small commission (at no extra cost to you). Learn more.

Best audio interface for REAPER: top picks (quick answers)

These cover the most common buying situations.

Pick Why it’s good Best for Link
Focusrite Scarlett 2i2 All-rounder Simple, reliable, and a great first interface for vocals + guitar. Beginners, home studio starters Check price
Focusrite Scarlett Solo Budget Lowest-cost clean entry point if you record one source at a time. Solo creators, quick demos Check price
M-Audio AIR 192×6 Alternative Solid value alternative if you want something different from Focusrite. Home recording on a budget Check price
More inputs (8+) Expand When you need multiple mics/instruments (bands, drums). Bands, drums, multi-mic setups See options

How to choose an audio interface for REAPER

REAPER isn't fussy about hardware. Almost any modern USB interface will work. What matters is matching the interface to what you record and making sure it has solid drivers. Check these five things before you buy:

Still deciding between an interface and a mixer? Read audio interface vs mixer and USB vs Thunderbolt.

Best audio interface for REAPER by budget

Prices change often, so these are grouped by tier rather than exact price. Check current prices before you buy. For deeper comparisons, see the best audio interfaces for beginners and the best audio interfaces under $200.

Entry level: one or two inputs, best value

Mid-range: the sweet spot for most home studios

More inputs: bands, drums and multi-mic setups

Not sure? If you're a solo musician recording vocals and an instrument, a two-input interface like the Scarlett 2i2 or MOTU M2 covers 90% of home studio needs.

How to set up your audio interface in REAPER (5 minutes)

  1. Install the driver first (Windows), from the manufacturer's website. Mac users can usually skip this.
  2. Plug the interface directly into your computer, not into a USB hub.
  3. In REAPER, open Options → Preferences → Audio → Device.
  4. Set Audio system to ASIO (Windows) or Core Audio (Mac), then choose your interface as the device.
  5. Tick Request sample rate and set it to 48000 (or 44100). Either is fine. Just keep it consistent across a project.
  6. Tick Request block size and start at 128 samples for recording.
  7. Click OK, create a track, choose your input, arm the track for recording, and turn on record monitoring if you want to hear REAPER's effects while you play.

Next steps: how to record vocals in REAPER and how to record guitar in REAPER. New to REAPER? Grab the free REAPER Quick-Start Cheat Sheet. It has the key settings and shortcuts on one page.

Fixing crackles, pops and latency in REAPER

Crackling and delay are the most common audio interface problems. Work through these in order:

Audio interface for REAPER: FAQ

Do I need an audio interface to use REAPER?

No. REAPER runs fine with your computer's built-in audio for editing and mixing. But to record microphones or guitar with good quality and low latency, an audio interface is the biggest upgrade you can make.

Should I use ASIO4ALL with REAPER?

Only as a fallback. If your interface has its own ASIO driver, use that. It's more stable and gives lower latency. ASIO4ALL is useful for basic devices that don't come with a dedicated driver.

What buffer (block) size should I use in REAPER?

Start at 128 samples for recording. If you hear crackles, go up to 256. For mixing large projects, use 512 or 1024. Latency doesn't matter much when you're not recording.

Is one input enough?

If you only ever record one source at a time, yes. Most people end up wanting to record vocals and guitar (or a stereo keyboard) together, so a two-input interface is usually the safer buy.

Should I record at 44.1 kHz or 48 kHz?

Either works well. 48 kHz is the standard for video and YouTube, and 44.1 kHz is the traditional music standard. Pick one and stay consistent within each project.

Do audio interfaces work on both Windows and Mac with REAPER?

All the interfaces on this page work with REAPER on both Windows and macOS. Windows users should install the manufacturer's ASIO driver. Most work on Mac without any driver.

Suggested next reads (internal links)

E-book · Instant Download

The Home Studio Setup Guide

Choosing an interface is just the start. Get the complete guide to gear, room acoustics, REAPER, and free plugins — at every budget.

See What’s Inside — A$12 →

PDF e-book · ~5,000 words · 6 chapters · Instant download

Got your interface? Here’s what’s next: Grab the free REAPER cheat sheet — 18 shortcuts, settings, and a free plugin starter pack.

Get the Free Cheat Sheet →